MP1 Leather Backed Tool Pouch

MP1
Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

$69.99

The MP1 is a compact tool pouch with a leather “Pocket Pad.”

- +
Add to Compare

Description

The MP1 is a compact tool pouch with a leather “Pocket Pad” to slip into your back pocket for a quick and easy carry. It also has a “Fold-Over” leather belt loop with snap for a more permanent connection and comes with a stainless steel metal tape measure clip.

 

Specification

PRODUCT SPECIFICATIONS:

  • Width: 3.5”
  • Length: 5”
  • Height: 11”
  • Weight (empty): 2 lbs

MAXIMIZED TOOL STORAGE CAPACITY:

  • 11 vertical pockets
  • Electrical tape strap
  • Snap-over belt loop
  • Stainless tape clip
  • 2-D rings
  • Back pocket "stuffer blocker"

RUGGED MATERIALS & CONSTRUCTION:

  • Waterproof Body Fabric: 1200 PVC Impregnated Denier Nylon
  • Waterproof Tool Pocket Fabric: 1200 PVC Impregnated Denier Nylon
  • Treated Cow Leather
  • D-Rings: Powder Coated Steel
  • Rivets: 38 zinc, marine grade rivets
  • Stitching: Industrial Strength Double Nylon Stitching

OTHER FEATURES:

  • Warranty: 5 Years (see Veto warranty terms and conditions)
 

Download MP1 Product Sheet

Additional Information

Weight1 lbs

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!


Download The Product Sheet of MP1

Video

There is no Video available for the product

Reviews (1)

1 review for MP1 Leather Backed Tool Pouch

  1. Rated 5 out of 5

    hoenig.matt (verified owner)

    Perfect size for everyday carry. Downsizing from the TP4 to this. I prefer to use the pocket flap and use that between the belt inplace of the snap. This allows the pouch to sit higher and can wear comfortably all day. Able to carry linemen, needle nose pliers/strippers, dykes, 10-1, small adjustable, small tongue and groves, t-stat screwdriver, thermometer and marker. The tape clip on the front also doubles to carry M12 impact to keep at arms reach. Carry this and then grab a pm/service bag or install bag depending on the call. Highly recommend only thing is I wish I would have bought sooner

Add a review