Find A Dealer

TP1L Leather Tool Pouch

Made In USA  Leather Pouch  New Products  Tool Pouches - TP1L
Rated 3.00 out of 5 based on 1 customer rating
(1 customer review)

$79.99

MADE IN USA! 6 Pocket Compact Full Leather Tool Pouch

- +
Add to Compare

Description

MADE IN USA! The TP1L is a full leather, compact multi-tool pouch designed to carry and organize a minimum quantity of tools for quick and easy access when needed. Made in Ohio.

Specification

PRODUCT SPECIFICATIONS:

  • Width: 3.5”
  • Length: 5.5”
  • Height: 11"
  • Weight (empty): 2 lbs.

MAXIMIZED TOOL STORAGE CAPACITY:

  • Vertical Tool Pockets: 6 Interior and Exterior
  • Back Pocket "Stuffer Blocker"
  • Electrical Tape Strap
  • 2-D Rings
  • "Snap Over" Belt Loop
  • Stainless Tape Clip

RUGGED MATERIALS & CONSTRUCTION

  • Full Buffalo Leather Construction
  • D-Rings: Powder Coated Steel

OTHER FEATURES:

  • Made In The USA
  • Warranty: 5 Years (see Veto warranty terms and conditions)

Additional Information

Weight 1 lbs

Veto Pro Pac Tool Bags Product Care and Maintenance

Keep the Zippers Clean & Lubricated

Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!  

Download The Product Sheet of Made In USA  Leather Pouch  New Products  Tool Pouches - TP1L

Video

Reviews (1)

1 review for TP1L Leather Tool Pouch

  1. Rated 3 out of 5

    dpayotte (verified owner)

    The pouches construction and overall feel are your standard veto extremely high quality and attention to detail the tape clip is awesome it protects the bag from getting chewed up and the little D rings on the back are awesome hanging stuff but I do have a few complaint about the pouch
    1- standard screw drivers don’t sit all the way down in the pockets they don’t fall out but they rest around the top of the slot for them, Not Klein’s, Wera or Wihas and if you have a 10 in 1 it’s not even close you have to use the front facing large slot for them
    2- the tunnel loop where the bag attaches to your belt is abosolutley infuriating I think it’s because the attachment point to your belt is too thin (if you look how wide the bag is the tunnel loop is very short compared to it) but it has a tendency to swing in front of your leg or behind your butt and it won’t stay put on your hip it’s an easy fix I just ziptie it to my tool belt but if you plan on attacthing this on your pants belt and not a dedicated tool belt I can see this being a massive annoyance

Add a review